ALKALIN KB+Si

ALKALIN KB+Si
Liquid, high-alkaline (pH ≥ 13.5), foliar potassium-boron fertilizer with silicon
Intended use
agricultural crops, cotton, flax, fruit trees, olive trees, fruit bushes, berries, grapevine, citrus, coffee, vegetables, ornamentals, lawns
Technique of application
foliar sprays
Available packaging
  •     1l; 5l; 10l; 20l; 1000l
Directions for use
Foliar sprays

ALKALIN KB+Si is a liquid, high-alkaline (pH ≥ 13.5) potassium-boron fertilizer with silicon with protective properties.

 

ALKALIN is a range of specialized foliar fertilizers, which are characterized by high pH. Alkaline pH of fertilizer solutions activates the immune factors of plants and reduces fungal diseases development.

ALKALIN fertilizers differ in nutrient content and, thus, can be used at different stages of plant development. ALKALIN fertilizers provide the plants with necessary nutrients and at the same time, support plant protection. ALKALIN fertilizers are very useful in an integrated plant cultivation.

 

ALKALIN KB+Si, due to its high content of boron and potassium, is recommended for use in early spring to increase resistance to spring cold and frosts, but also in other periods of the growing season, when the plants show demand for these two elements. ALKALIN KB+Si also contains silicon, which strengthens the structure of the cell walls, thus increases the resistance of plants to abiotic and biotic stresses.

 

Nutrients g/l % (m/m)
Total nitrogen (N) 42 3.0
incl. ureic nitrogen (NH2) 42 3.0
Potassium oxide (K2O) 270 19.0
Boron (B) 70 5.0
Silicon expressed as SiO2 14.0 1.0

 

High-alkaline ALKALIN KB+Si is part of a wider strategy to support the natural resistance of plant – STRESS CONTROL SYSTEM (SCS).

 

FOLIAR SPRAYS

ALKALIN KB+Si is intended for foliar application in the form of an aqueous solution. ALKALIN KB+Si can be used in combination with other preparations, keep in mind, however, that alkaline pH of fertilizer solutions (pH above 11) hinder the miscibility with many agrochemicals. To confirm miscibility, a confirmatory test is required. Test results are presented in the table INTERMAG agrochemicals mixing table.
Detailed recommendations for foliar application are presented in the table below. You can also use the search engine and quickly find the dose rate and time of foliar application for your crop. Select your crop

 

Recommendations for foliar application for selected crops.
The recommendations may be modified taking into account the plants' requirements and growing conditions.

WHEAT winter and spring crop
Number of foliar treatments: up to 2. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

In plantations with acute symptoms of boron deficiency or in case of cereal varieties showing an increased demands for boron, apply ALKALIN K+B from tillering until heading.

◇ tillering (BBCH 22–29)

0.5–1 l/ha

◇ stem elongation (BBCH 30–39)

0.5–1 l/ha
TRITICALE winter crop

Number of foliar treatments: up to 2. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

In plantations with acute symptoms of boron deficiency or in case of cereal varieties showing an increased demands for boron, apply ALKALIN K+B from tillering until heading.

◇ Spring: continuation of tillering (BBCH 25–29)

0.5–1 l/ha
◇ stem elongation (BBCH 30–39) 0.5–1 l/ha
TRITICALE spring crop
Number of foliar treatments: up to 2. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

In plantations with acute symptoms of boron deficiency or in case of cereal varieties showing an increased demands for boron, apply ALKALIN K+B from tillering until heading.

◇ tillering (BBCH 21–29)

0.5–1 l/ha
◇ stem elongation (BBCH 30–39) 0.5–1 l/ha
BARLEY (FEED and MALTING) winter and spring crop

Number of foliar treatments: up to 2. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

In plantations with acute symptoms of boron deficiency or in case of cereal varieties showing an increased demands for boron, apply ALKALIN K+B from tillering until heading.

0.5–1 l/ha

◇ beginning of steam elongation (BBCH 30–32)

0.5–1 l/ha
◇ flag leaf stage – until first awns visible (BBCH 39–49) 0.5–1 l/ha
RYE winter and spring crop

Number of foliar treatments: up to 2. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

In plantations with acute symptoms of boron deficiency or in case of cereal varieties showing an increased demands for boron, apply ALKALIN K+B from tillering until heading.

◇ beginning of steam elongation (BBCH 30–32)

0.5–1 l/ha
◇ flag leaf stage – until beginning of heading (BBCH 39–51) 0.5–1 l/ha
OAT

Number of foliar treatments: up to 2. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

In plantations with acute symptoms of boron deficiency or in case of cereal varieties showing an increased demands for boron, apply ALKALIN K+B from tillering until heading.

◇  tillering (BBCH 22–29)

0.5–1 l/ha
◇ stem elongation – until flag leaf stage (BBCH 30–39) 0.5–1 l/ha
OILSEED RAPE winter crops

Number of foliar treatments: 3. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

Autumn:
◆ 4–8 leaves (BBCH 14–18)

1–3 l/ha

Spring:
◆ after spring start of growth, main stem development (BBCH 30–36)

1–3 l/ha
◆ inflorescence emergence – until beginning of flowering (BBCH 50–61) 1–3 l/ha
CANOLA
Number of foliar treatments: 2. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ leaf development – until beginning of main stem development (BBCH 14–31) 1–3 l/ha
◆ inflorescence emergence – until beginning of flowering (BBCH 50–61) 1–3 l/ha
SUNFLOWER

Number of foliar treatments: 2–3. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ 3–4 pairs of leaves (BBCH 16–18) 1–3 l/ha
◆ beginning of stem elongation (BBCH 30–33) 1–3 l/ha
◆ inflorescence development (BBCH 51–59) 1–3 l/ha
FLAX

Number of foliar treatments: 2–3. Optimum amount of working solution: 200–300 l/ha
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ leaf development on the main stem (BBCH 12–16) 1–3 l/ha
◆ stem growth (BBCH 30–39) 1–3 l/ha
◆ beginning of inflorescence development until beginning of flowering (BBCH 51–61) 1–3 l/ha
MAIZE

Number of foliar treatments: 2-3. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇  2–6 leaves unfolded (à BBCH 12–16), 4 leaves is the optimum stage for treatment 1–3 l/ha
◆ 7–8 leaves unfolded (BBCH 17–18) 1–3 l/ha
◆ stem elongation – until beginning of tassel formation (BBCH 31–51), until the height of the plants allows spray treatment 1–3 l/ha
SUGAR BEET

Number of foliar treatments: 3. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 4–6 leaves unfolded (BBCH 14–16) 1–3 l/ha
◆ 8 leaves unfolded – until beginning of crop cover (BBCH 18–31) 1–3 l/ha
◆ leaves cover 20–50% of the ground (BBCH 32–35) 1–3 l/ha
POTATO

Number of foliar treatments: 3-4. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ beginning of crop cover until 80% of ground is covered (BBCH 31–38) 1–3 l/ha
◆ tubers reach 20–30% of typical weight (BBCH 42–43) 1–3 l/ha
◆ tubers reach 40–60% of typical weight (BBCH 44–46) 1–3 l/ha
◇ tubers reach 70 of typical weight until tubers reach final weight (BBCH 47–48) 1–3 l/ha
SOYBEAN

Number of foliar treatments: 2–3. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ trifoliolate leaf on the 3rd node unfolded – beginning of side shoots development (BBCH 13–23) 1–3 l/ha
◆ beginning of inflorescence emergence – first flower buds enlarged (BBCH 51–55) 1–3 l/ha
◆ beginning of pods and seeds development (BBCH 70–72) 1–3 l/ha
LEGUMES
Number of foliar treatments: 2–3. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◇ leaf and shoot development (BBCH 13–29) 1–3 l/ha
◆ inflorescence emergence (BBCH 51–59) 1–3 l/ha
◆ beginning of pod development (BBCH 71) 1–3 l/ha
POPPY SEED
Number of foliar treatments: 2-3. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◇ 4–6 true leaves (BBCH 14–16)  1–3 l/ha
◆ beginning of stem elongation until floral bud becomes visible (BBCH 30–52) 1–3 l/ha
◆ first poppy seed pods begin to form (BBCH 71–73) 1–3 l/ha
SORGHUM

Number of foliar treatments: 3–4. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ leaf development (BBCH 13–15) 0.5–1 l/ha
◆ beginning of stem elongation (BBCH 31) 0.5–1 l/ha
◆ stem elongation until beginning of tassel formation (BBCH 35–51) 0.5–1 l/ha
◆ tip of tassel visible until flowering, beginning of pollination, visible stigmas (BBCH 53–63) 0.5–1 l/ha
SUGAR CANE

Number of foliar treatments: 1-3. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ leaf development until tillering (BBCH 15–29) 0.5–1 l/ha
◆ beginning of stem elongation (BBCH 31–35) 0.5–1 l/ha
◇ beginning of tassel development (BBCH 51–53) 0.5–1 l/ha
RICE

Number of foliar treatments: 2-3. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ tillering (BBCH 21–29) 1–3 l/ha
◇ beginning of stem elongation (BBCH 30–32) 1–3 l/ha
◆ end of panicle emergence (BBCH 57–59) 1–3 l/ha
COTTON

Number of foliar treatments: 3-4. Optimum amount of working solution: 200–300 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ 4th–6th true leaf unfolded (BBCH 14–16) 1–3 l/ha
◆ 30–50% of plants meet between rows (BBCH 33–35) 1–3 l/ha
◆ beginning of inflorescence emergence (BBCH 51–52) 1–3 l/ha
◆ beginning of bolls development (BBCH 71–72) 1–3 l/ha
APPLE TREE

Number of foliar treatments: 3–7. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ green bud stage (BBCH 55–56) 1–3 l/ha
◇ pink bud stage (BBCH 57) 1–3 l/ha
◆ beginning of flowering (BBCH 60–63) 1–3 l/ha
◆ flowers fading, majority of petals fallen (BBCH 67) 1–3 l/ha
◇ fruit development (BBCH 71–75) 1–3 l/ha
◇ immediately after fruit harvesting, 1–2 treatments every 10–14 days 1–3 l/ha
PEAR TREE

Number of foliar treatments: 3–7. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ green bud stage (BBCH 55–56)  1–3 l/ha
◇ white bud stage (BBCH 57) 1–3 l/ha
◆ beginning of flowering (BBCH 60–63) 1–3 l/ha
◆ flowers fading, majority of petals fallen (BBCH 67) 1–3 l/ha
◇ fruit development (BBCH 71–75) 1–3 l/ha
◇ immediately after fruit harvesting, 1–2 treatments every 10–14 days 1–3 l/ha
CHERRY TREE

Number of foliar treatments: 4-7. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ white bud stage (BBCH 57–59) 1–3 l/ha
◆ beginning of flowering (BBCH 60–64) 1–3 l/ha
◆ end of flowering (BBCH 67–69) 1–3 l/ha
◆ fruit reaches 50–60% of typical size (BBCH 75–76) 1–3 l/ha
◇ after fruit harvesting, 2–3 treatments every 10–14 days 1–3 l/ha
SWEET CHERRY TREE

Number of foliar treatments: 4-7. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ white bud stage (BBCH 57–59) 1–3 l/ha
◆ beginning of flowering (BBCH 60–64) 1–3 l/ha
◆ end of flowering (BBCH 67–69) 1–3 l/ha
◆ fruit reaches 50–60% of typical size (BBCH 75–76) 1–3 l/ha
◇ after fruit harvesting, 2–3 treatments every 10–14 days 1–3 l/ha
PLUM TREE

Number of foliar treatments: 5–7. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ white bud stage (BBCH 57–59) 1–3 l/ha
◆ beginning of flowering (BBCH 60–64) 1–3 l/ha
◆ end of flowering (BBCH 67–69) 1–3 l/ha
◆ second fruit drop (BBCH 73) 1–3 l/ha
◆ fruit reaches 50–60% of typical size (BBCH 75–76) 1–3 l/ha
◇ fruit reaches 70–80% of typical size (BBCH 77–78) 1–3 l/ha
◆ immediately after fruit harvesting, 1–3 l/ha
PEACH TREE

Number of foliar treatments: 5–7. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ pink bud stage (BBCH 57–59) 1–3 l/ha
◆ beginning of flowering (BBCH 60–64) 1–3 l/ha
◆ end of flowering (BBCH 67–69) 1–3 l/ha
◆ second fruit drop (BBCH 73) 1–3 l/ha
◆ fruit reaches 50–60% of typical size (BBCH 75–76) 1–3 l/ha
◇ fruit reaches 70–80% of typical size (BBCH 77–78) 1–3 l/ha
◆ immediately after fruit harvesting 1–3 l/ha
APRICOT TREE

Number of foliar treatments: 5–7. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ pink bud stage (BBCH 57–59) 1–3 l/ha
◆ beginning of flowering (BBCH 60–64) 1–3 l/ha
◆ end of flowering (BBCH 67–69) 1–3 l/ha
◆ second fruit drop (BBCH 73) 1–3 l/ha
◆ fruit reaches 50–60% of typical size (BBCH 75–76) 1–3 l/ha
◇ fruit reaches 70–80% of typical size (BBCH 77–78) 1–3 l/ha
◆ immediately after fruit harvesting 1–3 l/ha
CITRUS

Number of foliar treatments: 3-5. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ more than 5 leaves visible, not yet at full size (BBCH 15) 1–3 l/ha
◆ beginning of inflorescence emergence (BBCH 51–53) 1–3 l/ha
◆ end of flowering – until fruit set (BBCH 67–71) 1–3 l/ha
◆ fruit about 40% of final size (BBCH 74) 1–3 l/ha
◇ beginning of fruit colouring – until fruit ripe for picking (BBCH 81–83) 1–3 l/ha
OLIVE TREE

Number of foliar treatments: 2-4. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆optimum periods; ◇ optional/complementary periods):

◇ leaf development (BBCH 17–19) 1–3 l/ha
◇ shoot development (BBCH 31–37) 1–3 l/ha
◆ after flowering (BBCH 67–69) 1–3 l/ha
◆ beginning of fruit development (BBCH 71–73) 1–3 l/ha
COFFEE

Number of foliar treatments: 3-5. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ formation of branches (BBCH 21–25) 1–3 l/ha
◇ branch elongation (BBCH 31–39) 1–3 l/ha
◆ beginning of bud development (BBCH 51–53) 1–3 l/ha
◆ end of flowering (BBCH 67–69) 1–3 l/ha
◆ beginning of fruit development (BBCH 71–73) 1–3 l/ha
MANGO

Number of foliar treatments: 3-5. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ leaf and shoot development (BBCH 14–19) 1–3 l/ha
◇ shoot development (BBCH 31–39) 1–3 l/ha
◆ beginning of bud development (BBCH 51–55) 1–3 l/ha
◆ end of flowering (BBCH 67–69) 1–3 l/ha
◆ fruit development (BBCH 71–73) 1–3 l/ha
AVOCADO

Number of foliar treatments: 3-4. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ 2 treatments during leaf and shoot development (BBCH 19–39) 1–3 l/ha
◆ beginning of bud development (BBCH 51–55) 1–3 l/ha
◆ beginning of flowering (BBCH 61–63) 1–3 l/ha
◆ fruit development (BBCH 71–73) 1–3 l/ha
PAPAYA

Number of foliar treatments: 1-3. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ leaf development (BBCH 14–19) 1–3 l/ha
◇ beginning of stem growth (BBCH 31–33) 1–3 l/ha
◆ beginning of fruit development (BBCH 71–73) 1–3 l/ha
GOOSEBERRY

Number of foliar treatments: 2–3. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ beginning of vegetation, during leaf and bud development 1–3 l/ha
◆ fruit development 1–3 l/ha
◇ after fruit harvesting 1–3 l/ha
RASPBERRY fruiting on the annual shoots

Number of foliar treatments: 3-7. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ shoots reach 10–60% of final length (BBCH 31–36) 1–3 l/ha
◆ inflorescence development (BBCH 51–54) 1–3 l/ha
◆ beginning of flowering (BBCH 61–63) 1–3 l/ha
◆ fruit development (BBCH 71–76) 1–3 l/ha
◇ fruit development until first fruit reach final size (BBCH 77–81) 1–3 l/ha
◇ beginning of fruit colouring (BBCH 85) 1–3 l/ha
◇ immediately after fruit harvesting 1–3 l/ha
RASPBERRY fruiting on the biannual shoots

Number of foliar treatments: 4–8. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ leaf and shoot development (BBCH 13–39) 1–3 l/ha
◆ inflorescence development (BBCH 51–54) 1–3 l/ha
◆ beginning of flowering (BBCH 61–63) 1–3 l/ha
◆ fruit development (BBCH 71–76) 1–3 l/ha
◇ fruit development until first fruit reach final size (BBCH 77–81) 1–3 l/ha
◇ beginning of fruit colouring (BBCH 85) 1–3 l/ha
◆ immediately after fruit harvesting, 1–2 treatments every 10–21 days 1–3 l/ha
CURRANT

Number of foliar treatments: 4–7. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

 leaf and shoot development (BBCH 15–35) 1–3 l/ha
◆ buds closed until leaf tips above bud scales (BBCH 51–54) 1–3 l/ha
◆ beginning of flowering (BBCH 60–61) 1–3 l/ha
◆ beginning of fruit development until 30% of fruits formed (BBCH 71–73) 1–3 l/ha
◇ 50–70% of fruits formed (BBCH 75–77) 1–3 l/ha
◆ after fruit harvesting (BBCH 90–91), 1–2 treatments every 10–21 days 1–3 l/ha
BLUEBERRY – plantations without fertigationfruiting plantations

Number of foliar treatments: 4–5. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ bud development 1–3 l/ha
◆ inflorescence emergence until beginning of flowering   1–3 l/ha
◆ end of flowering / beginning of fruit  development 1–3 l/ha
◆after harvest 1–3 l/ha
◆beginninig of leaf colour turning 1–3 l/ha
GRAPEVINE

Number of foliar treatments: 2–5. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ 6th–8th leaves unfolded (BBCH 16–18) 1–3 l/ha
◆ inflorescences swelling – until inflorescences fully developed(BBCH 55–57) 1–3 l/ha
◇ end of flowering (BBCH 67–69) 1–3 l/ha
◆ berries pea-sized (BBCH 75) 1–3 l/ha

◇/◆ from beginning of ripening – until softening of berries (BBCH 81–85)

The treatment should be considered as optimal for wine grapes and red colored table grapes.  

1–3 l/ha

STRAWBERRY – plantations without fertigation – Summer-bearing varieties, not yet fruiting plantations – planted in autumn

Number of foliar treatments: 2. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ Summer – further vegetative development and bud initiation for next season 1–3 l/ha
◆ Autumn in the first year after planting – beginning of leaf colour turning 1–3 l/ha
STRAWBERRY plantations without fertigation – Summer-bearing varieties, fully fruiting plantations

Number of foliar treatments: 3–5. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ after start of growing season: 5th–7th leaf unfolded (BBCH 15–17) 1–3 l/ha
◆ balloon stage (forming of „hollow ball”) (BBCH 58–59) 1–3 l/ha
◆ the end of flowering (BBCH 67) 1–3 l/ha
◇ beginning of fruit development (BBCH 71–73) 1–3 l/ha
◆ beginning of leaf colour turning 1–3 l/ha
STRAWBERRY – fertigated plantations– Summer-bearing varieties, planted in summer with green potted plantlets – Cultivation in soil
Number of foliar treatments: 2–6. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ AUTUMN in the planting year – beginning of leaf colour turning 1–3 l/ha
◇ SPRING – leaf development after start of growing season 1–3 l/ha
◇ beginning of inflorescence emergence 1–3 l/ha
◇ beginning of flowering 1–3 l/ha
◇ beginning of fruit development 1–3 l/ha
◆ AUTUMN in the first year after planting – beginning of leaf colour turning 1–3 l/ha

STRAWBERRY – fertigated plantations– Summer-bearing varieties, planted in spring with frigo plantlets – Cultivation in soil

Number of foliar treatments: 1–4. Optimum amount of working solution: 500–1,000 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◇ 5th–8th leaf unfolded 1–3 l/ha
◇ beginning of flowering 1–3 l/ha

◇ beginning of fruit development

1–3 l/ha
◆ beginning of leaf colour turning 1–3 l/ha
TOMATO

Number of foliar treatments: 5–7. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 8–9 or more leaves unfolded on the main shoot (BBCH 18–19) 1–3 l/ha
◆ 1–3 inflorescences visible (BBCH 51–53) 1–3 l/ha
◆ first flowers open on 1–3 inflorescences (BBCH 61–63) 1–3 l/ha
◆ first fruit has reached typical size on 1 cluster (BBCH 71) 1–3 l/ha
◆ first fruit has reached typical size on 2–3 clusters (BBCH 72–73) 1–3 l/ha
◇ first fruit has reached typical size on 4–5 clusters (BBCH 74–76), 1–2 treatments every 10–14 days 1–3 l/ha
PEPPER

Number of foliar treatments: 2-3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 1–3 inflorescences visible (BBCH 51–53) 1–3 l/ha
◆ 9 or more flower buds visible until beginning of flowering (BBCH 59–61) 1–3 l/ha
◇ beginning of fruit development, 1–3 fruit have reached typical size and form (BBCH 71–73) 1–3 l/ha
EGGPLANT
Number of foliar treatments: 2-3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ 1–3 inflorescences visible (BBCH 51–53) 1–3 l/ha
◆ 9 or more flower buds visible until beginning of flowering (BBCH 59–61) 1–3 l/ha
◇ beginning of fruit development, 1–3 fruit have reached typical size and form (BBCH 71–73) 1–3 l/ha
CUCUMBER

Number of foliar treatments: 2–3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ formation of primary side shoots (BBCH 21–29) 1–3 l/ha
◆ 1–2 flower initials with elongated ovary visible on the main stem (BBCH 51–52) 1–3 l/ha
◇ 6–7 flower initials with elongated ovary visible on the main stem (BBCH 56–57) 1–3 l/ha
PUMPKIN

Number of foliar treatments: 2–3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ formation of primary side shoots (BBCH 21–29) 1–3 l/ha
◆ 1–2 flower initials with elongated ovary visible on the main stem (BBCH 51–52) 1–3 l/ha
◇ fruit development (BBCH 71–75) 1–3 l/ha
ZUCCHINI
Number of foliar treatments: 2–3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ formation of primary side shoots (BBCH 21–29) 1–3 l/ha
◆ 1–2 flower initials with elongated ovary visible on the main stem (BBCH 51–52) 1–3 l/ha
◇ fruit development (BBCH 71–75) 1–3 l/ha
CUCURBIT

Number of foliar treatments: 2–3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ formation of primary side shoots (BBCH 21–29) 1–3 l/ha
◆ 1–2 flower initials with elongated ovary visible on the main stem (BBCH 51–52) 1–3 l/ha
◇ fruit development (BBCH 71–75) 1–3 l/ha
MELON

Number of foliar treatments: 4-6. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ 3–5 true leaves unfolded (BBCH 13–15) 1–3 l/ha
◇ formation of primary side shoots (BBCH 21–29) 1–3 l/ha
◆ 1–2 flower initials with elongated ovary visible on the main stem (BBCH 51–52) 1–3 l/ha
◆ 6–7 flower initials with elongated ovary visible on the main stem (BBCH 56–57) 1–3 l/ha
◆ fruit development (BBCH 71–77), 2 treatments every 14–21 days 1–3 l/ha
WATERMELON

Number of foliar treatments: 4-6. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ 3–5 true leaves unfolded (BBCH 13–15) 1–3 l/ha
◇ formation of primary side shoots (BBCH 21–29) 1–3 l/ha
◆ 1–2 flower initials with elongated ovary visible on the main stem (BBCH 51–52) 1–3 l/ha
◆ 6–7 flower initials with elongated ovary visible on the main stem (BBCH 56–57) 1–3 l/ha
◆ fruit development (BBCH 71–77), 2 treatments every 14–21 days 1–3 l/ha
BULB VEGETABLES

Number of foliar treatments: up to 2. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ leaf development (BBCH 14–19) 1–3 l/ha
◇ harvestable plant parts begin to develop (BBCH 41–43) 1–3 l/ha
BROCCOLI

Number of foliar treatments: 2-3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 5–7 true leaves unfolded (BBCH 15–17) 1–3 l/ha
◆ 3–7 shoots visible (BBCH 23–27) 1–3 l/ha
◇ broccoli head begins to grow (> 1 cm) until head reaches 20% of typical size (BBCH 41–42) 1–3 l/ha
CAULIFLOWER

Number of foliar treatments: 2-3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 5–6 true leaves unfolded (BBCH 15–16) 1–3 l/ha
◆ 9 or more leaves unfolded (BBCH 19) 1–3 l/ha
◇ cauliflower head begins to grow (> 1 cm) until head reaches 20% of typical size (BBCH 41–42) 1–3 l/ha
WHITE HEAD CABBAGE

Number of foliar treatments: 4-5. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 5–6 true leaves unfolded (BBCH 15–16) 1–3 l/ha
◆ head begins to grow (BBCH 41) 1–3 l/ha
◆ head reaches 20–30% of typical size (BBCH 42–43) 1–3 l/ha
◆ head reaches 40–50% of typical size (BBCH 44–45) 1–3 l/ha
◇ head reaches 60–80% of typical size (BBCH 46–48) 1–3 l/ha
RED HEAD CABBAGE
Number of foliar treatments: 4-5. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ 5–6 true leaves unfolded (BBCH 15–16) 1–3 l/ha
◆ head begins to grow (BBCH 41) 1–3 l/ha
◆ head reaches 20–30% of typical size (BBCH 42–43) 1–3 l/ha
◆ head reaches 40–50% of typical size (BBCH 44–45) 1–3 l/ha
◇ head reaches 60–80% of typical size (BBCH 46–48) 1–3 l/ha
SAVOY CABAGE
Number of foliar treatments: 4-5. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ 5–6 true leaves unfolded (BBCH 15–16) 1–3 l/ha
◆ head begins to grow (BBCH 41) 1–3 l/ha
◆ head reaches 20–30% of typical size (BBCH 42–43) 1–3 l/ha
◆ head reaches 40–50% of typical size (BBCH 44–45) 1–3 l/ha
◇ head reaches 60–80% of typical size (BBCH 46–48) 1–3 l/ha
CHINESE CABBAGE
Number of foliar treatments: 2-3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ 3–5 true leaves unfolded (BBCH 13–15) 1–3 l/ha
◇ 7–9 or more true leaves unfolded (BBCH 17–19) 1–3 l/ha
◆ head begins to grow (BBCH 41) 1–3 l/ha
BRUSSELS SPROUTS

Number of foliar treatments: 3-4. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 5–6 true leaves unfolded (BBCH 15–16) 1–3 l/ha
◆ main shoot reaches 30–70% of typical size (BBCH 33–37) 1–3 l/ha
◇ development of lateral buds until 50% of sprouts close tightly (BBCH 41–45) 1–3 l/ha
◆ 60–80% of sprouts tightly closed (BBCH 46–48) 1–3 l/ha
KOHLRABI

Number of foliar treatments: 1-2. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ 5–9 or more true leaves (BBCH 15–19) 1–3 l/ha
◆ head begins to expand (BBCH 41) 1–3 l/ha
RADISH

Number of foliar treatments: 1-2. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◇ 5–9 or more true leaves (BBCH 15–19) 1–3 l/ha
◆ head begins to expand (BBCH 41) 1–3 l/ha
KALE

Number of foliar treatments: 1-2. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 5–7 true leaves unfolded (BBCH 15–17) 1–3 l/ha
◇ main shoot has reached 30–50% of final height (BBCH 33–35) 1–3 l/ha
CARROT

Number of foliar treatments: 4. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 4–5 true leaves / root begins to expand (BBCH 14–15/41) 1–3 l/ha
◆ root reaches 20% of typical diameter (BBCH 42) 1–3 l/ha
◆ root reaches 30–40% of typical diameter (BBCH 43–44) 1–3 l/ha
◆ root reaches 50–80% of typical diameter (BBCH 45–48) 1–3 l/ha
PARSLEY
Number of foliar treatments: 4. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ 4–5 true leaves / root begins to expand (BBCH 14–15/41) 1–3 l/ha
◆ root reaches 20% of typical diameter (BBCH 42) 1–3 l/ha
◆ root reaches 30–40% of typical diameter (BBCH 43–44) 1–3 l/ha
◆ root reaches 50–80% of typical diameter (BBCH 45–48) 1–3 l/ha
PARSNIP
Number of foliar treatments: 4. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ 4–5 true leaves / root begins to expand (BBCH 14–15/41) 1–3 l/ha
◆ root reaches 20% of typical diameter (BBCH 42) 1–3 l/ha
◆ root reaches 30–40% of typical diameter (BBCH 43–44) 1–3 l/ha
◆ root reaches 50–80% of typical diameter (BBCH 45–48) 1–3 l/ha
CELERY
Number of foliar treatments: 4. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ 7–8 true leaves (BBCH 17–18) 1–3 l/ha
◆  9 true leaves / root begins to expand until root reaches 20% of typical diameter (BBCH 19/41–42) 1–3 l/ha
◆ root reaches 30–40% of typical diameter (BBCH 43–44) 1–3 l/ha
◆  root reaches 50–80% of typical diameter (BBCH 45–48) 1–3 l/ha
BEETROOT
Number of foliar treatments: 3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◆ 5 true leaves / beginning of crop cover (BBCH 15/31) 1–3 l/ha
◆ storage root begins to develop, diameter above 2 cm (BBCH 41–43) 1–3 l/ha
◆ root reaches 40–70% of typical diameter (BBCH 44–47) 1–3 l/ha
PEA

Number of foliar treatments: 2-3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ development of leaves and shoots (BBCH 15–39)

1–3 l/ha

◆ 10% of pods have reached typical length (BBCH 71) 1–3 l/ha
◇ 30% of pods have reached typical length (BBCH 73) 1–3 l/ha
BEAN

Number of foliar treatments: 2-3. Optimum amount of working solution: 400–600 l/ha.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ formation of side shoots (BBCH 21–29)

1–3 l/ha

◆ first flower buds visible until first flower buds have enlarged (BBCH 51–55) 1–3 l/ha
◇ beginning of pod development, 10–30% of pods have reached typical length (BBCH 71–73) 1–3 l/ha
NURSERY OF PERENNIAL ORNAMENTAL PLANTS

Number of treatments: 2-5.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 2–4 treatments every 7–14 days in summer and autumn

spraying
0.25–0.3% solution

◇ while preparing plants for the winter, in order to increase winter hardiness
NURSERY OF ORCHARD PLANTS

Number of treatments: 2–5.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):

◆ 2–4 treatments every 7–14 days in summer and autumn

spraying
0.25–0.3% solution

◇ while preparing plants for the winter, in order to increase winter hardiness
NURSERY OF ANNUAL ORNAMENTAL PLANTS
Number of treatments: up to 3.
Proposed periods of use (◆ optimum periods; ◇ optional/complementary periods):
◇ every 7–14 days, starting from the early vegetative stages spraying
0.25–0.3% solution